Cart $0.00
0
0
Subtotal: $0.00

No products in the cart.

Petroleum Industry Emission Control

Petroleum Industry - Vent Gas Sweetener Filter change. Hydrogen sulfide is often the number one complaint attributed with petroleum industry and vent gas sweeteners. Organic vapors and ammonia are also contributing to the toxic emissions in the petroleum industry.

Petroleum Industry Emission Control

We make wide variety of products serving the petroleum industry.

Drum Type Filter Change Indicators

These filter change indicators include the BTIBTI Inline, BTI2 and  BTI3

Hydrogen sulfide is often the number one concern attribute with petroleum industry and vent gas sweeteners.

Organic vapors and ammonia are also contributing to the toxic emissions in the petroleum industry.

The use of Chemteq filter’s replacement indicator on the outlet of filter or carbon absorber warn the user when filter is saturated and.

Our filter replacement indicators, not only ensures the health and well being of the petroleum industry staff. But also ensures that residents in surrounding the plant are breathing odor-free air.

We make filter change indicators BTI for ammonia, hydrogen sulfide and organic vapors.

BTI 2 for ammonia and hydrogen sulfide. BTI 3 for ammonia and hydrogen sulfide.

Filter change indicators inline inlet BTI inline for ammonia, hydrogen sulfide and organic vapors.

Our high-capacity hydrogen sulfide filter change indicators, BTI, BTI2 and BTI3,  are suitable for large filters and carbon absorbers towers.

Sewer manhole filter change indicator

BTIS SMF for hydrogen sulfide and mercaptans

Hydrogen Sulfide Colorimetric Indicators

We supply waterproof and custom cut hydrogen sulfide indicators. Available in one side and two side.  You can see result from both sides. Because they are real time and sunlight has no effect on the indicators, they are ideal for hydrogen sulfide leak detection. 

Products Features:

1. Filter Change Indicators

a

Diameter and thread

BTI: 1”. Inlet thread 0.75” MNPT

BTI-Inline: 1”. Inlet & 0utlet thread 0.75” MNPT

BTI2: 2”. Inlet thread 1.5” MNPT

BTI3: 3”. Inlet thread 2.5” MNPT

b

Hight

BTI: 3.5”

BTI-Inline: 3.5”

BTI2: 4.5”

BTI3: 4.5”

c

Temperature range:

-20 – 4oC to 50 – 65oC (-4 – 39oF to 122 -149oF).

d

Humidity range:

5% RH to 95%RH

f

Shelf life range:

1-2 years

g

Service life range:

1-2 years

h

Allowable fluids:

Gases and vapors

2. Filter Change Indicator Stickers

a

Diameter

Area Monitors*: 1.5”

BTIS: 1.25”

BTIS-B**: 1.5”

BTIS-SMF***: 1.5”

b

Thickness

Area Monitors*: 0.12”

BTIS: 0.12”

BTIS-B**: 0.12”

BTIS-SMF***: 0.12”

c

Temperature range:

-20 – 4oC to 50 – 65oC (-4 – 39oF to 122 -149oF).

d

Humidity range:

5% RH to 95%RH

f

Shelf life range:

1-2 years

g

Service life range:

1-2 years

h

Allowable fluids:

Gases and vapors

* Monitoring air quality. Suitable locations, on stack, duct, vent, or flue

** Leak detectors suitable for chemical cabinets and chemical transport trucks

*** Filter change indicator sticker for sewer manhole filters

Ammonia PEL

Hydrogen Sulfide PEL

NIOSH Pocket Guide to Chemical Hazards